By Henrike Elvira. Hockey Gear and Equipment. Published at Thursday, March 29th, 2018 - 03:47:38 AM.
The following are guidelines to follow on how to fit a goaltender for equipment. Due to different heights weights playing sizes and brands of equipment goaltenders should see a local expert equipment dealer for proper equipment fitting. Selecting the proper size of equipment is important. Proper development requires that a goaltender play in the correct size gear.
When it comes to receiving a pass you want to turn the blade slightly toward the ice to form a pocket. Keep the angle of the blade so it takes the puck squarely. Don′t hold the stick too tightly when you are receiving a hard pass or the puck will “explode” off your stick.
Blocker. Proper blocker sizing will allow a goaltender to control the face of the blocker. This will lead to better rebound control and protection. Similar to fitting for a glove from the end of the finger channels to the tips of a goaltender's fingers there should be no more than 1/4 of an inch of space.
This shot uses the same technique as a wrist shot only done on the backhand. Start with the puck on the heel of the blade and as you transfer your weight forward from your back foot to the front roll your wrists over and release the puck while pointing at the target on your follow through.
Any content, trademark’s, or other material that might be found on the grafchokolo website that is not grafchokolo’s property remains the copyright of its respective owner/s. In no way does grafchokolo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.